Product ID:DECOR FLOR RESIN COMP D
MSDS Date:08/01/1986
FSC:8030
NIIN:00N090389
Status Code:A
Kit Part:Y
MSDS Number: CHYLB

Emergency Phone: 213-636-0561

Info Phone: 213-636-0561

Cage: 60782

Telephone: 310-886-9100

Cage: 60782

MODIFIED POLYAMINE EPOXY HARDNER

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MINOR BURNING TO EYES, NOSE,
THROAT AND SKIN. CHRONIC: DEFATTING OF THE SKIN - DIZZINESS AND
NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid:INHALATION: MOVE SUBJECT TO FRESH AIR. EYES: FLUSH WITH WATER
FOR AT LEAST 15 MINUTES - CALL PHYSICIAN. SKIN: WASH WITH SOAP AND
WATER. INGESTION: DO NOT INDUCE VOMITING - CALL PHYSICIAN.

Flash Point Method:SCC
Flash Point:200F,93C
Extinguishing Media:CO*2 - DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER SPILL AND PLACE
IN CLOSED CONTAINER. REMOVE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL DRY AREA - PROTECTIVE
GLOVES SHOULD BE WORN AS MATERIAL IS SLIGHTLY CORROSIVE.
Other Precautions:AVOID INHALATION OF HEATED VAPORS AND SPRAY MISTS.

Respiratory Protection:NIOSH APPROVED RESPIRATOR IF VENTILATION IS
POOR.
Ventilation:GOOD. LOCAL AND MECHANICAL (GENERAL) EXHAUST.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . AS
NEEDED TO PROTECT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Spec Gravity:1.01 (H*2O =1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE STRAW LIQUID - MODERATE AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS. AVOID CONTACT WITH EPOXY RESINS IN
UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:AVOID CONTACT WITH EPOXY RESINS UNTIL
READY FOR APPLICATION.

Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL ACCORDING TO
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.